The Pony Pac is a quick, easy way to hit the water. It is a great choice for anyone who doesn’t require an air bladder on their harness.

The Pony Pac has been upgraded with an innovative new weight pocket system. Custom receptacles on the lower back allow the user to easily click weight pockets into place. They can be jettisoned with a simple pull.

• Fits 13, 19, 30 and 40 cu. ft. pony cylinders.

• Can accommodate up to 10 lbs. of lead weight.

• Can be upgraded to a compact, travel BC with the addition of a Companion Air Cell.

p/n: Size
BC503 Small
BC507 Regular
BC509 X-Large

Available February

Deploying a marker buoy from depth has its challenges. Securing a line spool and SMB, connecting them together, deploying them, all while maintaining neutral buoyancy and holding on to other gear, has overwhelmed many a diver. The "Quick Launch" Marker Buoy simplifies the procedure! The line spool is stored within the marker buoy and is already connected to it! Just add air and let it fly.

• 6 ft. (183 cm) length / Large 12” (30.5 cm) circumference

• Lower pocket accommodates a spool with 50 ft. (15 m) of line (included)

• Spool line is attached to D-ring inside the pocket

• Open bottom with anti-spill baffle

• Combination oral and QD hose inflation

• Over-pressure relief valve with pull cord

• SOLAS reflective tape on both sides

p/n:
AC085-OR (Orange)
AC085-PK (Pink)
AC085-YL (Yellow)

In Stock Now

Rebreather, extended range, and sidemount divers have different requirements for a DSMB than recreational divers. From the heavy-duty 420D nylon fabric to the over-sized stainless attachment D-ring on the bottom, this DSMB is a quality product purposefully designed with the technical diver in mind.

• Closed bottom design - 45 in. (114 cm) length x 10 in. (25.4 cm) circumference.

• The stainless-steel tipped inflator allows oral or QD hose inflation.

• 2” (5 cm) wide SOLAS reflector tape all the way around.

• 2” x 4” (5 x 10 cm) white panel at the top to write on with a permanent marker.

• 1.5” (38 mm) over-pressure valve with pull cord for easy deflation and roll-up.

• 1” (25 mm) plastic attachment D-ring at the top.

p/n: HL206

In Stock Now

The Highland Hurricane Pocket securely holds your critical accessories. Thanks to two, large zipper pulls of different sizes, you can blindly identify which pocket is which. Internal D-ring attachment points prevent accidental loss of accessories. The Hurricane Pocket, made from 1000D nylon, offers multiple mounting options and efficient drainage.

• 2 attachment options

  - Tri-fold web loops clamp onto 2” (50 mm) harness webbing

  - SS D-rings allow attachment to backplate using  double-enders

• Made from 1000D nylon for extreme durability

• Different size zipper pulls so you can identify main and accessory pockets w/o looking

• Both pockets have quick water drainage

• Extra wide for reels, spools, SMBs and wet notes

p/n: HL215

In Stock Now

The Highland Tempest Pocket securely holds your critical accessories. The large, zippered pocket is ideal for a spare mask, reel, or SMB. The front accessory pocket is ideal for a spool or a jonline. An internal D-ring and loop attachment points prevent accidental loss of accessories. The Tempest Pocket, made from 1000D nylon, offers multiple mounting options and efficient drainage.

• 2 attachment options

  - Tri-fold web loops clamp onto 2” (50 mm) harness webbing

  - SS D-rings allow attachment to backplate using double-enders

• Main zipper up against stiffener panel for one-hand operation

• Made from 1000D nylon for extreme durability

• Both pockets have quick water drainage

• Extra wide for spare mask, reels, spools, and SMB

p/n: HL220

In Stock Now

The Highland Zephyr Pocket is a spacious utility pocket that securely holds your diving accessories. It features an 18” (46 cm) internal bungee loop so that you can clip off your accessories and not worry about dropping them while getting them in and out of the pocket. The Zephyr Pocket, made from 1000D nylon, offers multiple mounting options and efficient drainage.

• 2 attachment options

  - Tri-fold web loops clamp onto 2” (50 mm) harness webbing

  - SS D-rings allow attachment using double-enders

• Internal attachments

  - Includes 18” long loop of bungee to secure your accessories to

• Made from 1000D nylon for durability

• Drain grommet in the bottom

• Extra wide for reels, spools, SMBs and wet notes

p/n: HL225

In Stock Now

• Installs between standard regulator hose and the AGA Divator

• Chrome over brass construction with viton o-rings

• Allows for hose routing under the arm

• 9/16”-18 male fitting to AGA M16-1.0 female fitting

p/n: AC985

The UFO is a versatile, floating platform that can be adapted to numerous uses with the addition of customized kits and accessories. Use it for spearfishing, scuba instruction or hookah.

The base model is so feature-rich that do-it-yourselfers will find countless uses for it. There are plenty of tie-downs and attachment points along with ample storage space.

The UFO is rugged. Handles, clips and D-rings are reinforced. The inner bladders are made from thick PVC film and the outer shell is 600D with 4 coatings of polyurethane.

The UFO base model comes standard with a dive flag and staff, shoulder straps, thick foam floor board for rigidity, a crisscross bungee hold-down with tensioner, and enough bungee cord and pull bobs to build 6 tie-downs.

• Rugged construction
  - Outer shell - 600D with 4 coatings of polyurethane
  - Inner bladders – thick PVC film

• 28 attachment D-rings and 12 attachment hooks

• Includes 15” (38 cm) x 12.75” (32 cm) dive flag with wire stiffener, staff and mounting hardware

• 2 shoulder straps for hands-free transporting

• Crisscross bungee hold-down with tensioner

• Enough bungee cord and pull bobs to build 6 tie-downs

• 28” (70 cm) fish measuring scale along starboard side

• Drain holes with SS grommets

Dimensions: L 36” (91 cm) x W 26” (66 cm) x H 11” (28 cm)

p/n UF100

XS Scuba’s popular Phantom BC, a weight-integrated, back-inflation BC, has undergone a transformation for 2020. Introducing the new Phantom SL, the BC that allows you to Spread your Lead!

• Weight pockets mounted up high on the shoulders for excellent lead spreading capability
    - Each pocket holds 2 x 2 lb. weights (hard or mesh weights)
    - A total of 8 lbs can now be moved forward on the diver’s body

• Includes a pair 1 lb. ankle weights to redistribute weight 

• An internal, heavy-duty polyethylene chassis extends well into the shoulders to support the shoulder weight pockets and to keep diver’s shoulders comfortable

• Swivel shoulder buckles optimize the routing of the shoulder straps for a more custom fit

• Enlarged thumb loops accommodate gloved thumbs to more easily pull down on the shoulder straps

• Reinforcement panel on the rear of air bladder for increased durability

• Increased back padding for added comfort

• All-new cosmetics because we all know that you must look good to dive well!

• MultiMax breathable inflator option available

  Your Favorite Features Retained:

• Catch n’ ReleaseTM weight system for the easiest loading weight pockets
     - Secure your weights with visual, audible tactile confirmation
     - Single pull ditch for safety

• Lowered tank band integrates into BC’s waistband to transfer the cylinder’s weight to the hips

• No hard backpack allows the cylinder to stay in close, next to your body. This makes the cylinder feel lighter and much more comfortable

• Drop-down right pocket can hold slates or a small flashlight

• Knife mounting grommets on the left pocket

• 6 stainless steel D-rings provide many attachment options

• Only 4 sizes are needed to fit divers from XXS to XXL

The Phantom comes in 4 sizes:
XXS/XS - p/n BC332
SM/MD - p/n BC334
ML/LG - p/n BC336
XL/XXL - p/n BC338

Size Chart

The MultiMax adds convenience, efficiency and safety to your dive. By combining an alternate air source with an inflator, there is one less hose coming off the first stage. Gone are the days where the octopus is dragging in the sand or across fragile coral. The breathable MultiMax is located where your BC inflator resides. This makes it easy to find since you operate your inflator many times throughout each dive. In an out-of-air situation, your hand knows right where to go.

• Large, color differentiated buttons are easy-to-use, even with thick gloves

• The soft-touch purge cover is located on the bottom of the unit so it will not be affected by strong currents

• Easy-connect, push-on hose connector is very glove friendly

• Downstream demand valve with venturi assist for performance and reliability

• Custom Miflex regulator hose allows maximum flow to the MultiMax

• Includes inlet protective cap to keep out water and particulates

• The MultiMax has successfully passed the certification tests required by EN250:2014 to an auxiliary emergency breathing device integrated with a buoyancy inflation system.

p/n RG370

What do you get when you blend the best design features of the industry’s leading fins? Phenomenal performance! Introducing Phenom, XS Scuba’s high-performance fin for scuba diving.

• Phenom fins start with an iconic blade design that creates super channels on both the upstroke and downstroke. The channels direct the water longitudinally down the length of the blade, preventing spillover the side ribs.

• The blade is attached to a soft, comfortable foot pocket at the mid-foot position, as opposed to the front. This prevents hyper-extension of the toes and ankle and allows the entire foot to be used while diving the fin.

• Stretch Straps, with large finger loops and quick-release buckles, are comfortable, secure and convenient

• Raised ribs on the foot plate alleviate the suction effect when taking off the fins

• Molded from a proprietary composite material coupled with thermoplastic rubber, the Phenom Fins take comfort and efficiency to a whole new level.

Available in three sizes
p/n FN610BK (small) Black
p/n FN611BK (regular) Black
p/n FN612BK (large) Black

p/n FN610BU (small) Blue
p/n FN611BU (regular) Blue
p/n FN612BU (large) Blue

p/n FN610YL (small) Yellow
p/n FN611YL (regular) Yellow
p/n FN612YL (large) Yellow

Are you tired of fighting with your old gloves? Slide your hands into a pair of 4/3 Sliders and find out for yourself how easy it is to put on these gloves. The 4/3 Slider uses premium super-stretch neoprene covered with a tight-weave jersey. The result speaks for itself.

• Dual thickness
  - 3 mm neoprene on the palm side for dexterity

  - 4 mm neoprene on the back for added warmth

• Seams are glued and blind stitched for warmth

• Reinforced fingertips for increased durability

• 6 sizes available XS – 2XL

https://www.xsscuba.com/bootsgloves/43-slider-gloves

p/n
GV430-XS (x-small)
GV430-SM (small)
GV430-MD (medium)
GV430-LG (large)
GV430-XL (x-large)
GV430-2XL (2x-large)

Beach divers, we’ve heard your cry! You don’t want to put wet, sandy wetsuits and boots in the trunk of your car or in your gear bag with your other gear. The Landing Pad is meant for you.

• Spread the large 36” diameter Landing Pad flat on the ground

• Stand on it while peeling off your wet, sandy boots and wetsuit

• Pull up on the two handles to cinch the pad around your legs

• Step out of it, fasten it, and throw it in the trunk

• The water, sand and mud stay contained in the Landing Pad

p/n BG900

The SeaClear RayBlocker-HD mask is not only a popular mask in the RayBlocker-HD line, but it is the only mask that can accept corrective RayBlocker-HD lenses.

The SeaClear RayBlocker-HD can be purchased as an off-the-shelf, ready-to dive mask, or it can be purchased without lenses, so that you may install RayBlocker-HD corrective lenses yourself. Your local dive store can assist if necessary.

• RayBlocker-HD lens coatings use Sharper Image Technology, which provides enhanced edge definition, making subjects appear as if they are in high-definition

• Effectively reduces glare and UV

• The SeaClear Mask is available in black, hypoallergenic silicone and is sure to fit most faces

• The ratcheting buckle system is easy to adjust with gloves on

SeaClear RayBlocker-HD™ Mask with Corrective Lens Option

If you prefer to purchase the SeaClear RayBlocker-HD™ Mask with corrective lenses, you can purchase the mask with no lenses, along with 2 corrective lenses, and snap it together yourself. It’s quick and easy.

p/n: SMA945RX SeaClear RayBlocker-HD Mask (without lenses)

RayBlocker™ Corrective Lenses

RayBlocker Corrective Lenses are symmetrical so they can be installed in either the left-hand or right-hand position. They are available in 0.5 diopter increments from -1.5 to -6.5. Positive diopter lenses are not available.